Hello my friends, now I want giving you tutorial using sketch up. this software used for design. let's try this...
Tutorial made chairs:
1. Tools - tools used:
a. Select, its usefulness is to memiliih a line
b. Line, making a straight line, horizontally or vertically
c. Circle, a circle embuat
d. Arc, creating a line that can bend.
e. Eraser, delete a line
f. Paint bucket, give color to the selected section.
g. Push, provide space on an object
h. Orbit, doing the rounds on the selected object
i. Follow me, providing a circular nature
2. The first step in making use tool "Arc" to make the chair. In making the first point of the curve should be connected to the last point.
3. If the dots are connected push the "push" in order to have space.
4. After that, remove the middle, it is done so that each side of the handle to the side of the chair two (location and position).
5. Use the "line" to make the backrest to draw the line. And for the back end gnakan "arc" that can bend the line.
6. And for a place to put the foot just use the "line". Keep in blocks, if it is remove the top, so that the top open.
7. To be balanced when the seat was occupied, make a stand. Here I use the tool "circle". The trick for a small circle at the bottom of the seat, then pull down using a "push". And for a loop again with a larger size than before. And use "push" to pull.
8. And to make paying extra, by using the "circle". And do the same thing by creating a buffer seat in making umbrella pole.
9. For part of the umbrella itself, make a circle using the "circle" on the pole with a larger size. Then create a triangle facing up to the "line". Use the tools "follow me" to make a cone by pulling laterally side end connected to one another ..
10. Garnish with the tool adds color "paint bucket". And use the color as you like.
11. And TARA .... You have managed to make it.
ok just for it...
I hope you can..
see you later..
